"Industrial Technology Sculpture"

Industrial Technology Sculpture


ArtistTitle: "Industrial Technology Sculpture"

Sculptor: Robert Engman, Professor of Sculpture at the University of Pennsylvania

Location: Northwest of the Industrial Technology Center, visible from University Avenue

Date Installed: May, 1979 Cost: $10,000 ($11,850 including shipping from Pennsylvania and installation). In addition to monies received from the Industrial Arts Center building fund, private donations through the UNI Foundation were also used to fund this sculpture.

Larger Associated Project: Industrial Arts Center

Description: The sculpture consists of 1,536 Cor-ten steel rods that are four feet long andIndustrial Technology Sculpture one-half inch wide. These rods were welded together to form interlocking curvilinear patterns. The "Industrial Technology Sculpture" is approximately eight feet in both height and width, weighing 4,300 pounds. It is placed on a four and a half foot tall pedestal. The sculpture is meant to reflect the positive aspects of man's relationship with technology.

Other: The sculpture becomes a giant kaleidoscope because of the changing light patterns coming through the rods. Made of Cor-ten steel, the sculpture is intended to corrode to a point to form a protective layer for the steel within.

 

Compiled by Sarah Eaton; edited by Susan Basye
Special Collections and University Archives
February 1998


Rod Library Special Collections and University Archives
University of Northern Iowa
Cedar Falls, Iowa 50613-3675
Telephone: (319)-273-6307
Fax: (319)-273-2913
Email: Gerald.Peterson@uni.edu